The King Snake Forum
The King Snake Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 King Snake Posts
 Snake related D.I.Y
 LED lighting option for WOOD vivs/stacks
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Kehhlyr
The Resident Loon

United Kingdom
511 Posts

Posted - 26/03/2011 :  19:36:42  Show Profile  Click to see Kehhlyr's MSN Messenger address  Reply with Quote
I have several vivs and a stack, so buying multiple lights and guards for each one (purely to see the snakes, not for heat) would not have been cheap. So I decided to try a way to do it that was fairly cheap and easy to do.
What follows is how I did it:

First off, I got my cheap backside down to B&Q and bought one of these:

Linky to lights at B&Q

Hand modeled to show size:


I dismantled the unit (pliers and small flathead screwdriver required) and drilled holes into the side of the vivs that were 4mm smaller than the thread on the tube on the back of the housing, then inserted the fitting:


I purchased some LED GU10 bulbs from online: EBAY linky for bulbs

As you can see, the entire 1.2 watt power, Marty mcfly would need the combined power of millions of these to allow full functioning at 88mph..
1.2 watt also means less electric used. (woo).

If you have a looky about online then you can get coloured LEDS or changing coloured ones for that disco effect that all snakies love.

The bulbs when running for several hours generate very little heat:



So therefore I saved on having to buy guards.
HOWEVER this doesn't mean they are safe, they still have small holes on the back of the fittings, which if a snake poo'd on then it could go into the fittings. So guards are still recommended, but not a necessity like normal bulbs (even energy savers).

After adding the cables to the other side (externally on the vivs) and sticking a plug on, I ended up with this:

As you can see, they give off plenty of light but nearly no heat.


As an addition, the plate that the lights were attached to got screwed to the side of my stack, as it's metal my magnetic IR thermometer is always handy too.



These are the bulbs that come with the units, they're normally dichroic reflectors, VERY dangerous to use in vivs without guards as the light fittings temps measured in exactly the same place hit the 90c mark within minutes.

Make sure they don't get used in the fittings with the snakes in, EVER. Not even with a guard IMO as it's just far to risky to have something that hot inside a wooden viv.

For those that might not need the 3 piece light fitting, I also bought this:

For another viv, to have the same LED bulbs go in.
B&Q linky


Total price for 3 piece fitting and 3 LED bulbs was 17 quid.
I managed to pick up a few LED bulbs on ebay for a few quid for half-dozen, but I also bought some in B&Q that were 12 quid for 2.
So the option of where to get the bulbs would be down to you.
Single light fitting plus single bulb from ebay: just over 8 quid.

Obviously you'd need to be capable of adding extra mains voltage wire onto the back of the fittings, plus a plug.
But cost wise, is the cheapest I've found for multiple vivs.

-=Kehhlyr - The Resident Loon
SOME OF MY ANIMALS


Edited by - Gmac on 07/04/2011 00:11:16

Kehhlyr
The Resident Loon

United Kingdom
511 Posts

Posted - 26/03/2011 :  19:42:28  Show Profile  Click to see Kehhlyr's MSN Messenger address  Reply with Quote
Some of the linkys don't work now, but do a search for 'spotlight' on B&Qs website and it'll bring up about 150 different type, get it to change listing by price (low to high) and you should find single spots for about 4 quid, triples for about 10 quid.

-=Kehhlyr - The Resident Loon
SOME OF MY ANIMALS

Go to Top of Page

Mamma
Hatchling

United Kingdom
465 Posts

Posted - 06/04/2011 :  09:39:06  Show Profile  Reply with Quote
most awesome

1.0.0 goins kingsnake
0.1.0 hogg island boa
1.0.0 el salvador boa
0.1.0 bearded dragon
0.1.0 leopard gecko

Go to Top of Page

Kazerella
King Snake Admin

United Kingdom
1512 Posts

Posted - 06/04/2011 :  15:09:26  Show Profile  Reply with Quote
Great idea - wish I was so handy

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
The King Snake Forum © 2000-08 thekingsnake.co.uk Go To Top Of Page
Snitz Forums 2000